S3213 Outboard Marine Marine Oil Water Separation Filter

Model: S3213 SFC-19120-10B 35604941 35809097
Size: 12*12*25cm
To Replace Element
1. Loosen self-venting drain plug and drain the elementsinto a container.
2. Remove filter elementsfrom mounting bracket with bowl connected.
3. Remove bowl from filter elementsand clean o-ring gland on bowl. BOWL IS REUSABLE * DO NOT DISCARD.
4. Lubricate o-ring with oil or grease and install on bowl.
5. Install bowl onto new element, tighten by hand.
6. Lubricate filter top seal with oil or grease.
7. Fill filter/bowl assemble with clean and attach onto mounting bracket, tighten by hand.
8. engine and check to there are no leaks.
Colour:Photo Color
Material:Plastic + metal
Package Contents:
1* Water Separator
4* brass
Only the above package content, other are not included.
Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.