PET Space Candy Gloss Gray Blue Chameleon Metallic Color Shift Color Change Vinyl Wrap Auto Car Sticker Decal Film Sheet Bubble Free Air Release Technology

Item Specification:

Thickness of film (C=10 micron): 15C+/-0.5C

Thickness of film with release liner: 31C+/-0.5C

Type of film: Hybrid vinyl film with air channels (Designed for vehicle exterior with prefect paint condition)

Glue: Solvent based adhesive, odor: solvent odor (Low-Medium Tack - Easy to reposition)

Release liner: White silicone-coated paper with double-sided polyethylene coating, small square air release channels, origin Germany

Storing period: 2 years if stored in +10 Celsius to +20 Celsius for optimal quality, relative humidity 50%, in original package, away from direct sun light, clean and dry place

Indoor life: 4 years when followed rules of application and use

Outdoor life: 3 years when followed rules of application and use

Application: from +10 Celsius to +20 Celsius, usage from -30 Celsius to +30 Celsius

Dimensional stability: shrinkage less than 5%

Plastification: between 27%-35%

Breaking Strength: 22.7 N/10mm (Average)

Test Method: ASTM D3759/D3759M-057.4 N/10mm (Average)

Test Method: ASTM D3330/D3330-04

Light Ageing in UV Exposure:

Test Method: ASTM D4329-13 Cycle A ISO 105-A02:1993/Cor.2:2005

Test result: 4-5

Exposure cycle: ASTM D4329-13 cycle A

Lamp type: UVA-3408h UV at (60+/-2.5) Celsius BPT, 0.89 W/ (m2•nm)@340nm, 5h condensation at (50+/-2.5) Celsius BPT, Exposure Duration: 52h

Description:

Water resistant and weather proof.

Flexible and Stretchable for concave area.

Low cost to change the look of your vehicles.

Easy installation with dry application method.

Heat gun or household blow dryer for shaping is required.

Low - medium tack self adhesive (Easy to Reposition)

Easy to fit in most tight spots or corners (Primer 94 is required for non sticky surfaces, curves corners)

Material has no warranty for fading. Fluorescent Neon colors tend to fade faster than normal colors. Fading can be reduced with over lamination, preventing stretched areas, which fade even faster, and shelter from high U.V. times during the day.

Material is specially made for vehicle exterior paint surface in good condition. Buyers take self responsibility on unsuccessful result on other usage.

Always pre-test vinyl installation on vehicles.

Due to different monitors/calibrations, colors may vary slightly from the pictures.

Film colors can vary slightly from roll to roll. For the most consistency, please purchase a full roll.

For best result, professional installation is required; Buyers take responsibility on physical damage during installation such as over heating, over stretching, ripping.

This vinyl is designed for vehicle exterior wrap use ONLY. This vinyl wont stick good on polyethylene, polypropylene, ABS, PET/PBT blends, concrete, wood, glass, plastic, textured, aluminum, metal. Installers must use primer 94 for additional adhesion. This vinyl is not originally designed for plotter or cutter use. Buyer is responsible for all of the wrinkles creases issue if using on a plotter or cutter.