110V Handheld Induction Sealer Electromagnetic Sealing Machine W/2 Bottles 500W Electromagnetic Handheld Induction Sealers

Key Features

• Electromagnetic Induction Heating: It can use the high heat generated by the magnetic field to melt and laminate the aluminum foil to achieve fast sealing. This is a more convenient and efficient way of sealing.
  
  
• Larger Sealing Range: Its sealing range is 2-10cm/ 0.787-3.94in, which can meet most of your sealing requirements for your convenience.
  
  
• Adjustable Time: The operation time of the handheld induction sealer is adjustable, you can adjust it freely according to your own needs.
  
  
• Adjustable Power: It operates with five adjustable power levels (100W, 200W, 300W, 400W, and 500W), allowing you to adjust it as needed for your convenience.
  
  
• High Efficiency: It uses a thickened copper induction coil, which makes the device run more efficiently while consuming less power.
  
  
• High Safety: It comes with overload protection, which can prevent overheating damage to the protector due to overload of the main power line, thus ensuring your safety of use.
  
  
• Memory Function: When this machine is powered down or shut down and restarted, the yield and time data will not be cleared or lost.
  
  

Application

• It is widely used for sealing plastic and glass bottles in pharmaceutical, chemical, food, beverage, grease products, lubricant, antifreeze, etc. It cannot be used for metal caps, metal bottles, and pointed caps used for aluminum foil sealing.
  
  

How to Use

• Plug in the power supply and press the fourth button on.
  
  
• Press the first key to adjust the power cycle from 1-5. (1-5 gear power is 100w, 200w, 300w, 400w, 500w）
  
  
• Press the second and third buttons to adjust the sealing time.
  
  
• Place the mouth of the bottle with aluminum foil in the center of the bottom of the machine, press the switch on the top of the handle, and the machine automatically starts sealing.
  
  

Specification

• Model: DGYF-880
  
  
• Material: Plastic
  
  
• Sealing Way: Hand-held
  
  
• Plug Voltage: U.S. 110V
  
  
• Working Frequency：30±5%
  
  
• Applicable Bottle Material: Non-metal
  
  
• Sealing Diameter: 2-10cm/ 0.79-3.94in
  
  
• Adjustable Power: 100W, 200W, 300W, 400W, 500W
  
  
• Product Size: 15*22cm/ 5.91*8.66in
  
  
• Package Size: 25*18*18cm/ 9.84*7.09*7.09in
  
  
• Net Weight: 0.9kg/ 1.98lbs
  
  
• Gross Weight: 1.1kg/ 2.43lbs
  
  

Package Included

• 1* Handheld Induction Sealer
  
  
• 1* Spare Button
  
  
• 2* Bottles
  
  
• 1* Chinese User Manual
  
  

Notes

• It is recommended to hold the bottle straight and take a few minutes to experiment and get used to the machine, then you are ready to go.
  
  
• Please do not use it on foil-sealed metal caps, metal bottles, and spiked caps.
  
  
• Please tighten the cap so that the machine has a good seal around the bottle.
  
  
• If your sealed container is filled with lotion, body lotion, or anything that cannot withstand high temperatures, put the cap on while it is sealed and put it in the refrigerator for about half an hour before sealing.
  
  
• Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before ordering.