Wifi Camera with Night Vision, Wifi Remote Wireless Video Camcorders Camera with 64G Card, 4.4GHz WiFi Remote Monitoring, Built-In Microphone and Speaker

Wifi Camera Night Vision Wifi Remote Wireless Video Camcorders Camera With 64G Card
Feature:
The internal microphone supports two-way audio
Supports cards up to 128
Supports .4G HZ Wifi (Don't support 5G HZ WiFi)
Supports mobile video surveillance (iOS, Android)
Two-way audio: Real intercom, built-in microphone and speaker, instantly show the wonderful moments in your life Video playback: Support mobile client video playback, view the information you want at any
Product parameters:
Product Name: 30w WiFi webcam
Cpu:xr872at
Number of cores: core
Flash:4MB
Card: up to 128GB
Operating system: RTOS
Number of simultaneous users: 4
Input: built in microphone
Main frequency: 384mhz
Power consumption: 300mAh (infrared on); 150mah (without infrared)
Infrared irradiation distance: 3-5M
Working temperature and humidity: - 10 ℃ ~ 50 ℃, humidity less than 95% (no condensation)
Sensor chip: gc0308
Focal length: 2m
Angle: 50 degrees
Display resolution: 640x480p (30W)
Day night conversion mode: day night switching
Digital noise reduction: 2D digital noise reduction
Video standard: MJPEG
Video stream: 640x480p 12 frames
Audio standard: g711u
Audio transmission: recording
Storage interface: up to 128GB
Power interface: USB interface
Wireless standard: IEEE802 11b/g/n
Frequency range:.4 GHz ~.4835 GHz
Channel bandwidth: 20MHz
Security: 64 / 128 bit WEP, WPA / WPA2, wpa-psk / wpa2-psk
Product size:9x5.5cm/3.54x2.16 inch
Package size:10x7x7.1cm/3.97x2.79x2.79 inch
Gross weight:123g/0.26
The Package Include:
1 x Host
1 x Power line
1 x Rubber pad
1 x Use manual
1 x 64G card
1. Why can't devices be added to WiFi connection?
Make sure that the device has been resets to the factory settings before adding the device: long press the "res key" for 5 seconds to see that the indicator flashes or the prompt tone is resetting and revert the factory settings. In addition, the camera onl- supports.4GHz Wi-Fi. If the scene S- is routed, Hao turns the frequency of the router and selects.4G
. What if the display camera is disconnected?
First guard whether the power supply and network are normal, and then power off and restart the camera. If the line still drops restart, delete the camera in the app and add it again.
Q: how to check if your camera is abnormally offline?
1. Check whether the power supply and network are normal
. Reseat the power supply to restart the device
3. Reconfigure the camera
4. Check whether the network bandwidth at home is more than 4-M It is also necessary to insert card in the power-off state, otherwise it will crash