LS Stand ALone Wiring Harness For 03-07 4.8 5.3 6.0 Chevy GMC Vortec DBW 4L60E

Note:


The connector of the injector is delphi (if your connector is not delphi,you need to use the corresponding adapter cable).

The harnesses are for non-emissions equipped vehicles and do not include air pump or EGR provisions.



Features:

1. All of our harnesses are built with OEM Quality and better

2. All Harnesses have a High Quality Grommet installed on the Harness (THAT SLIDES FOR DESIRED MOUNTING)

3. Harnesses receive a quality check before shipment.

4. GM Color Codes. Many Companies Do NOT Use GM Color Codes.

5. High Quality Reinforced Ring Terminals

6. 1200 Degree Fiberglass Braid on All Circuits Ran by Heat

7. All Factory CPA (Connector Position Assurance Locks)

8. 18" ADDED LENGTH FOR EASY COMPUTER MOUNTING

9. Harness comes with a complete install instruction packet.

10. All harnesses come with the needed Dash Connections, which include Speedometer, Tachometer, Park Neutral, TCC, Malfunction


Indicator, and a DLC Port.



【Compatible With】:
Green/Blue PCM MULTEC/Delphi Injector drive by wire LS 4L60E Engine Automatic Transmission Harness. For vortec 8 cylinders using 4l60e DBW gearbox automotive.

【Application】:
for 2003-2007 Chevrolet GMC Cadillac for Hummer Vortec 4.8L 5.3L 6.0L Engines.

【Advantages】:
These harnesses are made of high-quality copper wire with good conductivity. All circuits feature 1200 degree fiberglass braid, run by heat.

【Note】：
Not Compatible with EV1 and EV6 injector! Only fits Multec/Delphi injectors.

【Tips】:
4L60E DBW wiring harness has a variety of different wires and plugs, it is recommended that you ask a professional to install it to ensure correct installation.




Fitment:

Fits 2003 - 2007 CHEVROLET, GMC, CADILLAC AND HUMMER TRUCK ENGINES (DRIVE BY WIRE ONLY) WITH 4L60E TRANSMISSIONS.


Specifications:

These harnesses are designed for retrofitting '03 - '07 Vortec engines (4.8, 5.3, 6.0-Liter) and 4L60E transmissions into older


muscle cars and street rods or newer non-emissions controlled vehicles.

Harness allows use of the factory Vortec intake manifold.

They are completely plug and play with four wire hookup (switched power, constant power and ground connections required).

Harnesses are designed with a sliding grommet seal and 4 - 5 feet of length from the rear of the cylinder head to the PCM mounting


position under the vehicle dashboard.

A sliding grommet seal allows for professional, leak proof installation.

Harnesses are professionally constructed from Brand New GM Delphi Connectors and TXL (Polyethylene Cross Linked) High Temperature


Wire to GM Specifications.

All harnesses are 100% Quality Inspected prior to shipping.


Pakckage including:

1x Wire Harness


Note:

The harnesses are for non-emissions equipped vehicles and do not include air pump or EGR provisions.