Monitor your water usage with confidence using our high precision flow meter. Designed for durability and accuracy, this water flow meter provides real-time tracking of flow rates and total consumption. Whether you need a reliable flow meter for industrial systems, agricultural irrigation, or home management, our device ensures leak detection and efficient water control with an easy-to-read display and simple installation.
Specification
Power Supply-DC 2030V (Standard: DC 24V/1.5A)
Ripple & Noise-Upp30mV Uss10mV; Uer=2.0mV
Working Current-<650mA
Output-420mA / Fixed current / RS485
Baud Rate-2400 / 4800 / 9600 / 19200
Data Bits-8
Parity-None / Odd / Even
Stop Bits-1
Communication Protocol-MODBUS RTU
Flow Range-0176 Nm³/h
Turn-down Ratio-1:100
Accuracy-±1.5% F.S.
Repeatability-±0.2% F.S.
Working Pressure-2 MPa
Pipe Diameter-DN25
Connection Type-Internal thread
Medium Temperature-<55°C
Relative Humidity-<95% RH
Signal Output-RS485, 420mA, NPN/PNP
Medium Type-Gas (Air, CO, N, O, Ar, etc.)
Applications
Suitable for real-time gas flow measurement in various industries:
Air, nitrogen, CO, oxygen, argon, and other gases.
Machinery & Automation
Chemical Petrochemical
Pharmaceutical & Biotech
Energy Environmental Engineering
Research Institutions
Metallurgy & Steel Industry
Paper Pulp Manufacturing
FAQs
Q1: Is it compatible with different gas types?
A: Yes, it supports air, nitrogen, CO, oxygen, argon, and other non-corrosive gases.
Q2: Does it require pressure or temperature compensation during installation?
A: No, the thermal mass flow meter measures directly without additional compensation.
Q3: What output signals are available for system integration?
A: It supports 420mA analog output, RS485 (MODBUS RTU), and NPN/PNP digital output-fully compatible with PLC/DCS systems.
