Black Flag™ Eliminator 1.5-Ton Low-Profile Aluminum Racing Jack with Dirt Wing and Large Saddle Upgrade, 3,000 lb Capacity, Quick-Lift Pump, Wide Body Design, Track Pit Use

The Black Flag™ Eliminator weighs less than 37 pounds with a max lift of 16-1/8-inches. Requires just 2-3/8-inches of ground clearance to vehicle’s jacking point. 1-1/2-ton lifting capacity (3K pounds) provides safe lifting margin for most vehicles. Only 4-3/4 full pumps of jack handle to reach full lifting height. Wide footprint of the Black Flag™ Eliminator provides stability on any hard surface. Extended length jack handle with protective padding prevents body damage. Powder coated and anodized components provide unique looks and lasting protection. Axle mounted front wheels with rear casters for quick and easy jack positioning. Dual grab handles provide easy jack positioning or ability to carry the jack to the vehicle. Dirt wing provides a wide, stable surface to use the floor jack on dirt or other soft surfaces. Dirt wing made from laser cut and press bent 3/16-inch thick 5052-H32 aluminum sheet. Larger jack saddle provides a fitted floor jack saddle surface against tubular race car frames. 3-3/8-inch diameter saddle features 1.00-inch and 1.75-inch tubing support notches. Saddle made from CNC-machined cold-rolled steel round bar stock for strength. Accessory upgrades bolt on easily to the included Black Flag™ Eliminator jack. Make Pit Repairs Fast And Safe With Our Black Flag™ Eliminator Floor Jack Kit The track surface may be the most critical thing on a racer’s mind come race day, but nearly as important is the surface of your pit space. Your pit space is your home for the day/night or even a whole weekend, and that means repairs and maintenance that must happen on site and must be handled wherever you are told to pit your rig. Most tracks have nothing more than a grassy field or at best pea gravel for you to pit on. Attempting to use an aluminum floor jack can mean an unsafe working environment due to instability of the jack on the soft pit surface. While some may counter the soft surface with a chunk of plywood or other means to spread the load safely, it’s not only another item to safely store in your trailer but something else to grab in a hurry when you need to get the car in the air quickly. Using our Black Flag™ Eliminator Low Profile Racing Floor Jack is a great solution. One only made better by adding a floor jack dirt wing, something often seen on sprint car jack, to the jack along with a larger steel jack saddle designed for tubular frame support. Together these pieces provide a substantial increase in stability without the need to grab any secondary items for support. 1-1/2-Ton Max Lift, Low 2-3/8-Inch Minimum Clearance And Low-Effort Jack Handle There’s nothing more frustrating than jacking up your ride only to find it isn’t high enough off the ground for the work that you need to accomplish. With the Black Flag™ Eliminator you get an impressive 16.13 inches of lift from the jack saddle’s seated position with just 4-3/4 full pumps of the jack handle. Our Black Flag™ Eliminator low-profile aluminum floor jack requires just 2-3/8-inch of clearance between the ground and your jacking point for the floor jack’s saddle to be properly placed for lifting your vehicle! This is one of the lowest jack saddle heights available in an aluminum race-style jack for the money! Making the raising of your vehicle that much easier is the generous 47.50-inch long padded jack handle that provides for quick and effortless lifting via the floor jack’s quick-lift dual piston pump mechanism. The knurled handle features padding on the lower section for protecting the side of your vehicle. Our Black Flag™ Eliminator aluminum 1.5-ton floor jack can safely lift up to 3,000 pounds. Weighing just 36.78 pounds, the Black Flag™ Eliminator 1.5-ton jack is light enough to secure in your race trailer for use at the track. Accessories Install Quickly To Provide Additional Stability And Safety Adding our Black Flag™ dirt wing and large saddle upgrade to your Eliminator Low Profile Aluminum Racing Floor Jack is a straightforward process