HeavyDuty AllStainlessSteel Mobile Dolly Stand Only for 80Quart Vollrath Mixing Bowl 79800

Heavy-Duty All-Stainless-Steel Mobile Dolly Stand Only for 80-Quart Vollrath Mixing Bowl 79800For busy commercial kitchens with food--salad, eggs, egg salad, tuna casserole, dough or batter--being mixed non-stop by workers who then have to move the mixed food from one corner of the kitchen to another, this mobile mixing-bowl dolly/station/stand is made for the job The dolly is all stainless steel, except the casters (plastic) and metal around them (zinc-plated steel) The thickness of the bowl-holding ring--solid stainless steel, not hollow--is 3/16 inch; the legs are made of unbendable tubular stainless steel; each leg is attached to the bowl-holding ring by heavy welding running along entire length of leg-to-ring contact; each leg is attached to a corner of the blunted-corners-triangle-shaped shelf/platform below by heavy welding on both sides of leg-to-platform-corner contact; the platform is made of a stainless steel sheet 3/64 inch thick The dolly is sized for the inside of the curved rim of the 80-quart Vollrath bowl (not included in this purchase) to rest on the dolly’s ring, for a secure fit; easy roll, easy-swivel casters (all non-locking) move with ease over smooth floors and rough floors Outer diameter of bowl-holding ring is 30-3/16 inch, inner diameter of ring is 29-5/8 inch; height of ring (top of ring to bottom of ring) is 2 inch; height of shelf/platform (top of platform to bottom of platform) is 1-5/8 inch; casters are 4 inch diameter x 1-1/4 inch wide; overall height of mixing-bowl stand is 35-7/8 inch; height from the top of the platform to the bottom of the ring is 27 inchLength of shelf/platform--taken from one leg to the next (not including the legs)--is 25-1/4 inch