3M MM08877 Silicone Lubricant Plus Wet Type

3M Silicone Lubricant is available in wet and dry formulas. A wet lubricant is used in wet conditions simply because it won’t wash off when riding in wet conditions through puddles or in the rain. However, dry lubricants, on the other hand, are generally lighter; wax-based, in many instances, is much less prone to attracting dirt, making them better suited to dry conditions or where dirt and dust are more prevalent. It eliminates rubber squeaks, prevents sticking, and seals out moisture. It delivers the versatility to work in many applications. Use either product for lubricating moving parts; eliminating squeaks caused by friction; protecting against rust and corrosion; sealing out moisture; preventing the buildup of glues, waxes, inks, and paints; preserving plastics, rubber, and leather; and prolonging the life of cutting tools. Made in the U.S.

1. Turn spray tip so opening points to dot on rim of can.
2. Hold can upright and push actuator on top of can all the way down to apply a uniform spray. Position the actuator away from your face before spraying.
3. If using the extension tube, insert it in to the actuator using a twisting motion.
4. Best results are obtained when material is at room temperature. Higher temperatures increase the pressure in the can, and lower temperatures reduce the pressure.
5. Hold can 8 inches to 10 inches from surface to be sprayed. Apply evenly and use sparingly.
6. For hard to reach or small surfaces, use the extension tube.
7. On rubber, leather, and vinyl; apply and wipe with a cloth.