Tire Repair Machine Portable Car Tyre Repair Machine Vulcanizing Machine Tire Patches Tool Repair Tread Tool Constant Temperature Tire Patches Machine Portable Tire Repair Machine Thermostat Repairs

Product Parameters:

Materail: Iron+Aluminum

Input Voltage:110v

Automatic Temperature:140°C-165°C

Vulcanizing Area:100*85mm2

Length:295mm/11.61in

Height:410mm/16.14in

The Diameter of the Screw:27mm/1.06in

Weight:6.45kg/14.22lb

Features:

1.Simple, One-man Operation

2.Repairs Tread, Shoulder and Sidewall

3.Large-capacity, Fully Rotating C-frame Accommodates Different Wheel Sizes and Allows for Vertical or Horizontal Repairs

Tire Repair Method:

1、Clean the Surface of the Wound Where the Tire Needs to Be Repaired and Mark It.

2、Use a Grinding Machine to Grind the Surface of the Wound, the Area Is Slightly Larger than the Wound。

3、Use the Brush to Raw Rubber and Gasoline Blending Good Mortar (or Hot Glue) Evenly Coated on the Polished.。

4、Cut the Appropriate Size of the Rubber, It Will Fill in the Wound,

5、Pressure the Hot Head on Raw Rubber (If Possible Can Pad a Thin Layer of Aluminum or Iron in the Raw Rubber), Try to Put the Wound in the Central Heating Head, Pressing Screw, Fixed Tires.

6、 Turn on the Timer Switch and Set It in the Right Place, Cold Start Can Refer to "20" (or Adjust the Vulcanizing Time According to the Temperature and the Condition of the Wound) the Heat Start Time Can Be a Little Shorter,If You Do Not Need Timing Can Be Set on the Manual Gear, Then the Hot Head to Work.

7、at the End of Vulcanization, Tire Repair Machine Automatically Cut off Power Supply Hot Head.

Packing List:

1*Tire Repair Machine