2 EX LED light bulbs headlights for New Holland Skid Steer Loader C175 L160 L175

The new light bulbs are on sale at a big discount. Before buying, you can check whether the light bulbs of your vehicle are suitable.

1 pair of new super bright, high-quality LED bulbs

1. It is a very common light bulb, used in almost all modern equipment.
2. Easy to install, install it into your wiring harness socket.
3. Very bright, longer service life, less voltage used, and not as hot as traditional light bulbs.
4. Modern light bulb projection lens, the beam angle is 360 degrees,
5. With plastic base, waterproof gasket and alloy body.
6. Each is more than 2250 lumens.
7. For reference, the brightness is similar to 40 watt halogen bulbs, but they will not heat up, nor will they melt or burn like halogen bulbs.
8. Color temperature: 8000k, BLUE
9. No need to modify or transform your vehicle.

Features:

1. High brightness: 10000-12000MCD;
2. Energy saving: 5W is equivalent to the brightness of 50W tungsten lamp;
3. Safety: 12V safety voltage, double insulation;

4. Simple installation: just replace the original car bulb directly.
5. It can be used as front and rear fog lights/brake lights/reversing lights/turn lights, etc.
6. The model is the same as the original car, no need to change the line, just replace the original car bulb.
7. There is no delay in lighting, and the response time is fast. Without filament structure, the vehicle control circuit is not easy to oxidize.

8. Rich in color and pure color, DIY can be done at will, highlighting personalized lighting.
9 Cold light source, good comfort, belongs to the green environmental protection light source.

LED has the following characteristics and advantages:
1. Simple installation, plug and play, no need to change the line,
2.Energy saving, low power consumption, high luminous efficiency, low load current, now the oil is too expensive, 10% of the fuel consumption is used in car bulbs, switching to LED lights can effectively save fuel consumption and protect the car circuit.
3. Low fever, more conducive to driving safety.
4. The corresponding time is fast. The traditional light bulb needs to be warmed up and emits light. There is a 0.3 second delay. It can travel a distance of 4.4 meters at a speed of 40KM/hour and 0.4 seconds. LED lights, no delay. It can effectively prevent rear-end collisions. .
5.Strong shock resistance, no glass, tungsten wire structure.
6. Long service life
7. Pure color, bright color, high brightness

Install Caution:
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Be sure to turn off the ignition and remove the key.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.

*Package Including:
2pcs LED Bulbs
New and old packaging will be shipped randomly
The part fits the 41 models listed below:
for BX1850D - B30100 HEAD LIGHT
for BX1860 - B30100 HEAD LIGHT
for BX1870 - B30100 HEAD LIGHT
for BX1870-1 - B30100 HEAD LIGHT
for BX2350D - B30100 HEAD LIGHT
for BX2360 - B30100 HEAD LIGHT
for BX2370 - B30100 HEAD LIGHT
for BX2370-1 - B30100 HEAD LIGHT
for BX24D - B30100 HEAD LIGHT