Intertape 591 Double Sided Flatback Paper Tape: 1 in x 36 yds. (Beige)

Intertape 591 Double Sided Flatback Paper Tape is a premium 7.0 mil bleached flatback paper tape coated on both sides with a high shear resistant natural rubber/resin adhesive that bonds equally as well to almost any surface. The tape comes on a white easy release crepe paper liner that allows for either machine or hand application. IPG 591 double coated tape has become a recognized standard in the manufacture, repair, and replacement of golf grips. It is also ideal for photograph mounting, carpet installation, textile manufacturing (twister room), steel-rule die (make-ready), and any application that requires two adhesive surfaces for joining. Made in the U.S.

NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i.e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 24mm x 33m. As with any adhesive tape product it is always the user's responsibility to determine that the product is suitable for their intended use; e.g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first.

Technical Information
- Core: 3 inch diameter
- Backing/Carrier: bleached flatback paper
- Adhesive: natural rubber/resin
- Release Liner: white crepe paper
- Thickness: 12 mils (carrier, adhesive, liner) 7 mils (carrier, adhesive) 5 mils (liner)
- Adhesion: 52 ounces per inch (to stainless steel test panel)
- Tensile Strength: 34 pounds per inch (longitudinal)
- Service/Operating Temperature: up to 200F
- Elongation: 3 %