Features:
* Small size, easy to disassemble and assemble.
* The valve body is made of aluminum alloy, with strong pressure resistance, good sealing, safe and reliable use.
* The inner hole is treated with special technology, with small friction resistance, low starting pressure and long service life.
* Please pay attention to whether the air path direction and connection are correct during installation. Pay attention to dust prevention. It is recommended to install a muffler at the exhaust port.
* The pneumatic solenoid valve is a single-control solenoid valve with a pilot valve core structure, good sealing and sensitive response.
Specifications:
Part name: Solenoid valve
Model: 4V210-08
Material: Metal + ABS
Color: As shown in the figure
Working pressure: 0 - 150 PSI / 0 - 990 kPa
Vacuum: 0 - 29.5 inHg / 750 mmHg
Thread diameter: Suitable for BSPT G1/4
Diameter: 6mm
Working temperature: 0 - 60 °C / 32 to 140F
Maximum pressure resistance: 1.2Mpa
Working temperature: -5~50°C
Power consumption: DC12V
Current: 29mA
Insulation and for protection level: Class F, IP65
Maximum operating frequency: 4
Excitation time: 0.05 seconds
Effective cross-sectional area: 16mm² (CV=0.89)
Connector diameter: Inlet = outlet = 1/4 inch, exhaust = 1/8 inch
Size: 11.8*6.6*2.1 cm/4.6*2.6*0.8 inches (length*width*height)
Position and number of ways: two-way, five-way
Package contents:
1 x solenoid valve
3 x connectors
2 x mufflers
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.
