5-Pack 812XL Ink Cartridges for Epson Ink 812 XL 812XL T812 T812XL Combo Pack (2Black, 1 Cyan, 1 Magenta, 1 Yellow)

2 x 812XL Black ink cartridge

1 x 812XL Cyan Color ink cartridge

1 x 812XL Magenta Color ink cartridge

1 x 812XL Yellow Color ink cartridge

Page Yield:

Up to 1100 pages per 812XL Black ink cartridge (at 5% coverage Letter/A4)

Up to 1100 pages per 812XL Color ink cartridge (at 5% coverage Letter/A4)

Compatible Printers:

Compatible for Epson EPSON WorkForce Pro WF-7310 / WF-7820 / WF-7840

Compatible for Epson WorkForce EC-C7000

(Please confirm your printer model before placing order)

⭐Good Helper for Printing：

1. Premium Ink, smooth print and colorproof

2. Clear text and vibrant colors

3. Newest chip, quickly recognized by printer

4. Long lasting print, more cost-effective than the brand

5 Easy to install

Installation Instructions:

Step 1: Remove the protective cover cap.
Step 2: Tear off the pink plastic.
Step 3: Insert the cartridge into corresponding slot until it clicks into place.
(Attention: Do not touch the chip)
If you have any questions, please feel free to contact us. A satisfactory service is promised.

👉WARM TiPs:

1. Before placing an order,please be sure to confirm your printer model
2. Printer screen pop up "Non-Original Cartridge"? Please just click "OK"and they will go ahead.
3. When occur an error message "Replace Cartridge" or "Low ink" ? Please reinstall them and try. You can try up to 5 times.
4.If prints come with fading color, steak or broken lines when installing new ink cartridges,please try to do printer head cleaning in printer setting once or twice.

Why choose us:
Our product be made in an ISO 9001 and ISO 14001 certified facility, we provide 24 months warranty and free replacement of defective ink cartridges! If there're any questions welcome to contact us.

Please read the following Q&A carefully.--------------------------------------------------------------------------------------------------------------------------------------------------------------(Whether you purchase this product or a product from another brand, you can try this method to solve the common problems you encounter.)

Error Message Solution:

If your printer shows an error indicating that the ink cartridges cannot be recognized or if the ink level isn't fully displayed after installation, please follow these steps.

1. Remove the cartridge and gently wipe the chip with a clean cloth or wipe.
2. Reinstall the cartridge firmly into its slot. Try 1–3 times if needed.
3. Make sure the cartridge is compatible with your printer and inserted into the correct color slot.
4. If the issue continues, turn off the printer, unplug the power cable, wait 30 seconds, then plug it back in and turn it on.

Troubleshooting: Print Quality Issues:

If the cartridge is not printing properly, color error, please follow these steps.

1. Ensure that the yellow seal tape is completely removed to expose the air hole on the cartridge.
2. Perform a "Print Head Alignment" from the Maintenance or Tools menu on your printer's display screen or software interface.
3. If the issue persists, perform "Print Head Cleaning" three times.
4. After cleaning, print a nozzle check or test page to verify whether the issue has been resolved.
5. If the problem continues, leave the cartridges installed in the printer and try again after 2 hours.

Disable Update Instruction:

To avoid compatibility issues with non - OEM International Model cartridges, we recommend disabling automatic printer updates or selecting "No" when an update prompt appears.

Step 1: Click on the Settings.
Step 2: Select Firmware Update.
Step 3: Click on Notification.
Step 4: Press Off to confirm not update.

INSTALLATION STEP

Step 1: Pull off the yellow seal tape.
Tips: Do not touch the chip and the ink outlet.