Scapa S305 Double-Sided Removable/Permanent Tape: 4 in x 60 yds. (Clear)

Scapa Dublfilm S305 Double-Sided Removable/Permanent Tape is a polyester film, differentially coated with a removable acrylic pressure-sensitive adhesive (low tack) on the liner side, and a high-performance, permanent rubber adhesive (high tack) on the exposed side. Scapa S-305 double-sided (AKA double-coated) tape is ideal for temporary bonding applications such as protective padding and temporary labels and decals. Smooth and easy to use, S305 removes cleanly from metals, glass, high gloss paint systems, and other surfaces while providing excellent heat resistance and aging properties. Applications include laminate to foams and felts for protective pads, temporary mounting of artwork, temporary labels and decals, and temporary protective packaging. The tape's polyester film carrier adds dimensional strength and stability. The product is supplied with a 60# tan poly-coated release liner.

The liner side is the tape which is exposed once you remove the liner and the exposed side is the tape visible once you unwind it from the roll. Also please note that the removability property does not apply to aluminum surfaces. Made in Canada.

NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i.e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 96mm x 55m. This tape is typically cut to width from log rolls so most sizes ship on non-branded plain white cores. As with any adhesive tape product it is always the user's responsibility to determine that the product is suitable for their intended use; e.g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first.

Technical Information
- Core: 3 inch diameter neutral
- Backing/Carrier: polyester (PET) film
- Adhesive: acrylic & rubber
- Release Liner: 60# white polycoated paper
- Thickness: 6.75 mils (carrier, adhesive, liner) 2.55 mils (carrier, adhesive) 0.5 mils (carrier)
- Adhesion: 117 ounces per inch (exposed side) / 25 ounces per inch (liner side)
- Service/Operating Temperature: -40°F to 260°F (exposed side)
- Service/Operating Temperature: 40°F to 110°F (liner side)