Looking for a smart, convenient, and practical electronic tool? This 2 in 1 oscilloscope and multimeter is your choice.
It can act as a 2.5Msps high-speed sampling, 1MHz oscilloscope, and as a digital multimeter that can accurately measure various electrical parameters.
Powerful features such as auto waveform capture,wonderful clear display,multi-function parameter setting, waveform storage etc.
It works for DIY design, car repair. equipment maintenance.
Features:
7. Oscilloscope parameter independent setting : Auto/Normal/Single scanning modes,time base, amplitude, rising edge, falling edge and level
8. Can store 100 sets of data and 10 sets of waveform. Historical data and real-time display can be displayed on same screen, greatly facilitating the analysis of data
9. Panel calibration, memory calibration coefficients do not need potentiometer adjustment, higher reliability.
10. Overload protection 500mA/10A double fuse, double protection meter.
Specifications:
Display:240 X 320 LCD Screen
Display area: about 2.4 inches
Backlight : White
Input resistance : 10M
Battery : AA battery x 3(not included)
Power consumption : About 80mA
Use time : Low light about 5 hours
Storage : 100 Data,10 Waveforms
Use: 0 ° C - + 40 ° C; <75% RH
Storage : -10 ° C + 60 0 C; <90% RH
Oscilloscope characteristics
Analog bandwidth: 1MHz (limited to ACV oscilloscope)
Maximum real-time sampling rate: 2.5Msps
Number of channels: 1
Input impedance: about 10M
Time base range: 2.5us - 10s/div
Vertical amplitude accuracy: ±(5%+ 0.2div)
Time base accuracy: ±(0.01% + 0.1div)
Scan mode: Auto/normal/single
Trigger edge selection: rising edge/falling edge
Automatic setting: automatically set the time base and vertical amplitude
Related Products:
oscilloscope,
portable oscilloscope,
automotive oscilloscope,
oscilloscope automotive,
lab oscilloscopes,
osciloscopio,
osciloscopio automotriz,
handheld oscilloscope,
digital oscilloscope,
usb oscilloscope
