JIAHAOO Pressure Washer Soap Injector Replacement Parts for Stratton Homelite Ryobi Husky 13mm Wrench Fit

Feature:
Function: If parts on your high pressure washer pump are worn, rusted, or clogged with hard water deposits, you can replace it with this set. This will make your high pressure washer pump smoother to use.
Easy Installation: First, install the outer o-ring and second, install the inner o-ring, which can be a bit difficult to insert, which is where the long, thin tool comes into play. You need to put the o-ring into the inner groove of the injector and use a slender tool. Next, insert the ball, then the spring.
Warm Tip: When inserting the injector onto the manifold and tightening it with a half-inch wrench or socket, make sure not to over tighten it, as this could cause it to snap or strip the manifold's aluminum threads. Just stick to it and the O-ring will keep it from leaking.
Replacement Method: Remove the old fuel injector with a wrench. Remove any sticky or dry soap from the container. Make sure the rubber o-ring is on the injector as shown. Put the ball bearing in the injector, and then use the spring on the small end of the spring against the ball bearing. Insert the injector into the socket and use a 13mm wrench to tighten the injector. Do not overtighten or it will damage the o-rings or crack the white metal on the pump.

Specifications:
Application: The lnjector kit is compatible with for Briggs & Stratton, for Homelite, for Ryobi & for Husky pressure washer chemical soap injector.
Material: Rubber, copper and steel
The part number replaces: 190593GS 190635GS 203640GS 308452002

Fitment:
Fits many other brands with for FAlP Pumps and for Himore Pumps.
for Excell for DeVilbiss, for Troy Bilt, for Husky, for Campbell Hausfeld, for Generac, for Coleman Powermate, for Ridgid, for Task Force, for Faip, for Homelite, for Brute, for Duracraft, for Simoniz, for Simpson, for John Deere, etc.

Packaging Includes:
2 x Brass barbs
2 x Check valve balls
2 x Springs
2 x O-rings