220V Peanut Picking Machine 3KW Electric Peanut Picker Groundnut Harvesting Thresher Machine

Introduction:
The peanut picker is used to separate the vines and fruits after peanut harvest.It can be flexibly moved and used in the field, with clean fruit picking, low shell breakage rate, and minimal loss. It can be used for both dry and wet stems, with high work efficiency and clean threshing.
The peanut picking device is based on the traditional full-feed picking device to reduce the crushing rate of peanuts and reduce energy consumption. Compared with the traditional fruit picking device, the biggest difference is the half-feeding mode, which has less power consumption, high reliability and high cleaning rate, and is more suitable for homework.

Product parameter:
Voltage: 220V
Power: 3KW
Material: cast iron
Import size: 13*6.3in(33*16cm)
Machine size: 20.86*15.9*38.78IN(53*40.5*98.5CM)
Purification rate: 97%
Production: 100-150KG/h

Product safety precautions:
1. When feeding peanut seedlings, the fruiting part of the peanuts must be filled into the feeding port first, and the feeding should be uniform;
2. It is strictly prohibited to feed hard objects such as stones, wooden blocks, and metal objects into the machine during homework to avoid damaging the machine and causing personal accidents;
3. It is strictly prohibited to reach into the feeding port, fan port, and discharge port during homework;
4. During homework, the operator should tie the cuffs tightly, and female comrades should wear work hats;
5. If abnormal sounds are heard or faults are found during homework, the machine must be stopped for inspection, and faults must be eliminated in a timely manner. It is strictly prohibited to operate the machine with defects;
6. It is strictly prohibited for the fruit picker to work under overload; Professional personnel should inspect, adjust, and maintain the equipment after the end of each day's work. For example, adding lubricating grease, repairing welding, etc;
7. When the fruit picking machine is blocked by the drum, the feeding amount, the humidity of the peanut seedlings, the tightness of the motor triangle belt, and the power supply voltage should be checked;
When the peanut picker cannot pick the peanuts completely, adjust the gap between the rolling teeth and the bottom of the sieve. A large gap between the rolling teeth and the bottom of the screen can easily cause incomplete removal; When there are many impurities in the peanut fruit and the peanut small fruit is sucked out, the suction port should be adjusted appropriately. Lower the air intake when there is a lot of debris; When peanuts are sucked out, adjust the suction port.

Item include:239904
Peanut picking machine*1