Uxcell Heating Element Coil Wire, AC220V 800W / AC110V 200W Resistance Furnace Heater Wire Nichrome Cr20Ni80 Heating Elements Coil Heater for Oven Furnace Dryer, 4.7mm x330mm, Pack of 1

What is this?
This heating element coil is designed for ovens, furnaces, dryers, and other heating devices, and provides flexibility for diverse heating needs, especially in high-temperature industrial environments.

What will I get?
Material: Nichrome wire (Cr20Ni80).
Rated voltage & power: AC220V, 800W / AC110V, 200W.
Wire diameter: 0.45mm/0.018in.
Outer coil diameter: 4.7mm/0.188in.
Total length: 330mm/13.2in.
Package includes: 1 Pcs.

Is there any advantages of the product?
This Nichrome heating coil can operate at temperatures up to 600℃/1112℉, providing enhanced durability, high-temperature resistance, and stable mechanical properties at elevated temperatures. Nichrome material is not easily deformed or burned out, and provides a stable resistance value at both high and low temperatures, which ensures long-term stable operation. A dense oxide film is formed on the surface, which effectively prevents oxidation corrosion and prolongs service life.

How to use it?
1. Ensure the device is disconnected from power.
2. Remove the old heating coil and carefully unwind it from the insulators.
3. Stretch the new coil to match the original length and shape, and avoid over-stretching or bending the coil sharply.
4. Reassemble the device and test the operation after verifying all connections are secure.

What should I notice?
1. Always disconnect power before installation or maintenance.
2. Avoid compressing or deforming the coil during handling.
3. Ensure the coil does not contact any metal surfaces except at designated terminals to prevent short circuits.
4. Operate only within specified voltage and power ratings.
5. Allow the coil to cool completely before handling after use.