Heidts CA-102-M Mustang II Tubular Lower Control Arms, Coilover, Strut

You don't have to look any farther for tubular control arms for your hot rod. Full .120 wall, 1" diameter tubing, fixture welded and features screw-in ball joints and no-squeak bushings. These lower arms are designed to be used with strut rods and coil-over shocks. Will work with nearly any stock or aftermarket crossmember. Welding may be required on some applications. Replaces 1974-80 Pinto, Bobcat and 1974-78 Mustang II control arms. Full .120" wall. 1" diameter tubing. 13-1/2" center to center and 6" at widest point. 15-3/8" overall in length. Weigh about 6-1/2 pounds (each arm) Pivot Point width: 3.380" Fixture welded. Screw-in ball joints. No-squeak bushings. Works with Mustang II crossmembers that come without lower A-Arm tabs and require strut rods. Designed to be used with coil-over shocks. Note: This item is sold as a pair of two. Tubular Control Arms Application Chart(GIF) 413-34321 Tubular Lower Control Arm Instruction Sheet (PDF) Note: These lower control arms will require use of a strut rod and strut rod brackets. We recommend our tubular strut rods (91034322). Note: Consider our Mustang II Lower Arm bolt kit (91034311-2) for proper installation.