Primeweld CUT70DP 220-Volt 70-Amp Pilot Arc Plasma Cutter The pilot arc feature is especially useful for continuous cutting on rough surfaces or dirty metal. It has been redesigned to incorporate the latest high frequency inverter technology using V-MOSFETs, along with PWM (Pulse Width Modulation), the combination of which help deliver a far more constant, concentrated and precise current to the cutting surface. With this plasma cutter, the user can achieve smooth, clean and uniform cuts on a wide range of surfaces with minimal heat input and without distortion of metal. It is very easy to use by the DIY user, while fully accommodating the demands of professional operators. Input Voltages 220~240V, 1-PH, 50/60Hz Input Current 220~240V, 1-PH, 30A Output Current 20~70A Power Efficiency 85% Duty cycle @ 40C (104F) 60% @ 70A 100% @ 50A Dimensions with Handle 19 (483mm) L 12 (305mm) H 8 (203mm) W Weight 43lbs (19.5kg) Gas Supply Clean, dry, oil-free air Recommended gas inlet flow rate / pressure 4.8cfm @ 75psi (Min. pressure: 65psi) Input power cable length 6 (1.8m) Maximum Severance Cut Thickness* 1.35
