Casweld™ CIS Cast Iron To Steel Welding Rod Kit Universal electrode for joining a wide variety of ductile, nodular and malleable cast irons. Perfect For Joining Cast Iron To Steel Available In 1/2lb Kits Of: 3/32" Diameter - 11 Rod Kit1/8" Diameter - 7 Rod Kit5/32" Diameter - 5 Rod Kit Non-overheating, hard driving, Ferro-Nickel electrode for penetrating dirty-rusty contaminated cast irons. Microstructure: Consists of an iron-nickel austenite with finely distributed graphite. Flux Color: Black Excellent for joining cast iron to steel. Extremely strong arc drive penetrates surface contaminants. Special slag composition can be welded over without creating porosity. Extra nickel content insures crack resistant machinable welds. Recommended Current: DC Reverse (+) or AC Diameter 3/32" 1/8" 5/32" Minimum Amperage 50 70 100 Maximum Amperage 80 110 140 Deposition Rates: Diameter Length Weldmetal/ Electrode Arc Time of Deposition min/ lb Amperage Settings 3/32" 12" .44 oz 45 70 1/8" 14" .76 oz 22 90 5/32" 14" 1.07 oz 20 120 Tensile Strength: 74,000 psi (550 MPa) Yield Strength: 54,000 psi (390 MPa) Elongation: 22% Hardness: Rockwell B 88-90, Brinell 180, Vickers 189 Welding Techniques: Adjust the welding machine to the lowest proper setting that yields good welding conditions. Welding Positions: Flat, Vertical up, Horizontal, Overhead MADE IN THE USA
