Description:
The pneumatic press is the high-pressure gas produced by the compressor, which is transported to the solenoid valve through the gas pipe. The working state of the cylinder is controlled by the movement of the solenoid valve through the switch, and the punching is completed.
Optional manual switch control, with emergency stop switch, can also be controlled by a controller.
Microcomputer control system, can choose manual, semi- automatic and fully automatic operation.
Specification:
Voltage: 110V
Pressure: 1102lb/500kg
The die hole diameter: 0.78inch/20mm
Working Countertops Size: 9.4*10.4inch/24*26.5cm
Outer diameter of trachea: 0.39inch/10mm
Booster cylinder specification: 3.94inch-1.96inch/100mm-50mm
Working air pressure: 0.6-0.8MPa
Max working height: 9.8inch/250mm
Material: Cast iron
Range of application:
Suitable for electronics, electrical appliances, instruments, meters, cameras, watches, jewelry, hardware and garment, shoes and hats.
Note:
1. Check whether the air pipe is properly connected to prevent air leakage and make the machine unable to work normally.
2. Avoid placing your hand under the punching shaft during work to avoid accidents.
3. Do not wipe the machine with a damp cloth to avoid rusting the machine.
4. The rated pressure of the air compressor is 0.8mpa. The capacity of the air compressor storage tank is about 60L,the larger the capacity, the longer the service time and the more stable it is. The displacement is optional 200L/min,the larger the displacement, the larger the applicable machine model.
5. The actual output pressure is about 80% of the theoretical pressure.
Item included(230571):
Techtongda 1102lb/500kg Pneumatic Punch Press Machine
