Cambro 60296 2.8 in. 1 Ball Valve Pipe Adapter Hose

An adapter or adaptor is a device that converts attributes of one device or system to those of an otherwise incompatible device or system. Some modify power or signal attributes, while others merely adapt the physical form of one component to another. A hose is a flexible hollow tube designed to carry fluids from one location to another. Hoses are also sometimes called "pipes" (the word pipe usually refers to a rigid tube, whereas a hose is usually a flexible one), or more generally "tubing". The shape of a hose is usually cylindrical (having a circular cross section). A valve is a device that regulates, directs or controls the flow of a fluid (gases, steam, liquids, fluidized solids, or slurries) by opening, closing, or partially obstructing various passageways. Valves are technically fittings, but are usually discussed as a separate category. In an open valve, fluid flows in a direction from higher pressure to lower pressure. Valves may be operated manually, either by a handle, lever, pedal or wheel. Valves may also be automatic, driven by changes in pressure, temperature, or flow. These changes may act upon a diaphragm or a piston which in turn activates the valve. More complex control systems using valves requiring automatic control based on an external input (i.e., regulating flow through a pipe to a changing set point) require an actuator. They can be electromechanical actuators such as an electric motor or solenoid, pneumatic actuators which are controlled by air pressure, or hydraulic actuators which are controlled by the pressure of a liquid such as oil or water. An actuator will stroke the valve depending on its input and set-up, allowing the valve to be positioned accurately, and allowing control over a variety of requirements.

• Height: 1.95 in.
• Width: 6.2 in.
• Length: 2.8 in.