NETAJE 7.4'x7.4' Outdoor Metal Storage Shed with Updated Frame Structure and Lockable Doors for Backyard Garden Patio Lawn

I would like to start off by saying that this was by far. The easiest metal shed I have ever put together. Other than having help for 5 to 10 minutes on the walls, I put it together by myself. It did have a few Isssues. Here are the following issues I found while building the shed. The website has a photo showing the dimensions of 119.3" wide and 96.9" deep I almost made the base off these measurements but didn't have a truck to pick up the lumber. Good thing I didn't because the actual base is just under 106" x 115" I was missing 2 parts - 11L. The package had 4 - 11R instead of 2 of each. I contacted support, and they quickly shipped me the missing parts. They also had great communication keeping me updated on the status and tracking information. After I received temhe parts they sent another email asking if there was any other issues. On page 5 of the instructions, part 11R shows it is 1610mm. On page 19, where you use the part, it shows it is 320 mm. Page 23 Step 21 shows " Please note that the holes on the upper side of the roof panels are located closer to the outer edge." This should have been on page 22, Step 20. Page 28, step 26, the 3rd diagram It is a bit confusing as to what to do with part S17, maybe give direction that S17 needs to be placed behind the door. It does technically show this in the second bubble on the top corner, but i, for some reason, started at the bottom corner, and it didn't show this.

great value, puttingnit together was time consuming but not difficult. reinforced connections and easy assemble corners, hope the plastic corners last