55.77ft Stainless Steel Silver Deep Well Submersible Pump Water Pump Submersible Pump for Rain Barrels Tanks Rivers Reservoirs

Description

This water pump is precision made from high-grade stainless steel, and its excellent resistance to pressure and corrosion ensures that the product remains stable and less prone to deformation in extreme environments. The high power of 180W and 3000rpm allows for quick water pumping from rivers or reservoirs, providing plenty of power to achieve high-head irrigation in your garden or farm. This is a good choice to improve your irrigation efficiency.

Details

Fixed Pull Rings: They make it convenient for you to use with lifting ropes, making it very easy when going down the well.

Water Outlet: The diameter of a 1-inch outlet makes it easy for you to connect the pumping head and hose, saving you time and effort.

Application

It is suitable for extracting groundwater from ponds, lakes, rain barrels, tanks, rivers, reservoirs, canals, and other water-lifting projects and can supply water to septic tanks, villages, homes, farmlands, family lawns, gardens, farms, etc.

Specification

Material: Stainless Steel, Copper

Color: Silver

Style: Modern

Assembly Required: No

Motor Type: Pure Copper Motor

Power Source: Corded Electric

Flow Rate: 1.2m³/263.96gal/H

Power: 180W

Lift: 30m/98.43ft     

Noise: 0-30 dB

Voltage: 12V

Speed: 3000 rpm

Noise: 0-30dB

Protection Class: IP68

Number of Impellers: 1

Cable Wire Length: 17m/55.77ft

Product Size(D*H): 7.8*38.5cm/3.07*15.15in

Outlet Diameter: 2.5cm/1in     

Package Size: 38*18*10cm/14.96*7.09*3.94in

Product Size: 4.5kg/9.92lbs             

Gross Weight: 4.28kg/9.44lbs

Package Included

1*Water Pump

1*Water Adaptor

1*English Manual

Notes

1. Please note that the pumping speed is related to the depth at which the water pump enters the water, and the deeper the depth, the lower the speed.

2. Please read the instructions carefully and take note of the safety precautions contained therein.

3. Forbidden to use in water with sediment to prevent the sediment from jamming the pump and burning the motor.

4. Please note that this product is only suitable for pumping clear water, not oil, chemical raw materials, and other liquids.

5. This product uses a medium with a temperature not exceeding 122℉, a density of<1.2kw/dm³, and a pH value of 4-10.

6. The lift of this product should not be too low. If it is lower than 80% of the specification, it may cause excessive current and damage.

7. Please note that this product does not include water pipes and filters.

8. Please carefully check the cable and power supply before use and take protective measures to avoid potential safety hazards.

9. Please do not use without water or with a low water level to avoid idling. It must be fully submerged in water when used.

10. These water pumps need to be installed vertically. Please install an additional check valve (not included) at the outlet to prevent backflow.

11. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before you place the order.