ISC Helicopter-OG-HD Surface Guard Tape: 2 in x 30 ft. (Transparent)

ISC Helicopter-OG-HD Heavy Duty Surface Guard Tape is conformable and extremely strong 14-mil outdoor grade polyurethane tape. Also known as helicopter blade/leading edge wing tape, the thick film backing provides exceptional protection from tearing, punctures, erosion, and abrasion. ISC's surface guard tape also protects against extreme temperatures, ultraviolet light, and automotive solvents. The tape is clear (transparent) and comes on a white paper, 92-pound polycoated release liner.

Helicopter-OG-HD Surface Guard Tape Features and Benefits

• Won't yellow over time
• Exceptional paint protection
• Protects against UV light, hot and cold temperatures, solvents
• Resists erosion, abrasion, tears and punctures
• Made from polyurethane (not vinyl or PVC); stands up to abuse
• Extremely rugged; must be cut with scissors or razor knife
• Durable, easy-release liner
• Doesn't require solvent or heat to activate

Product Applications

• Body panels on race cars
• Bicycle frames
• Skis
• Kayaks
• Surfboards
• Ground effects
• Bumpers
• Tailgates
• Top fuel wings
• Trailer walls
• Spring car wings
• Roll cages
• Headlights
• Wheel wells
• Truck beds
• Toolboxes
• Hood and door edges
• Protects bar code labels in extreme conditions
• Rail protection on stand-up paddle boards (SUPs)
• Any painted or unpainted surface that is prone to weathering, chipping or scratching

Made in the U.S. NOTES: As with any adhesive tape product it is always the user's responsibility to determine that the product is suitable for their intended use; e.g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first.

Technical Information
- Core: 3 inch diameter
- Backing/Carrier: polyurethane film
- Adhesive: acrylic
- Release Liner: 92 lb. polycoated white paper
- Thickness: 19.2 mils (carrier, adhesive, liner) 14.5 mils (carrier, adhesive) 12 mils (carrier)
- Adhesion: 110 ounces per inch (to stainless steel test panel)
- Tensile Strength: 80 pounds per inch (longitudinal)
- Application Temperature: 50F (minimum)
- Service/Operating Temperature: -40F to 275F
- Elongation: 500 %