MAPLE ACE UCP207-20 Pillow Block Bearing 1-1/4" Bore, 2-Bolt, Self-Aligning, R3 Triple Lip Seal, Heavy Duty (Qty 4)

This UCP PILLOW BLOCK MOUNTED BEARING consists of an INSERT BEARING and a CAST IRON housing. The INSERT BEARING has Triple-Lip Seal: Unmatched protection in highly contaminated environments. Ensures significant bearing lifespan in severe dust, sand, slurry, and water. Bearing is Pre-Lubricated with High-Quality Grease, ideal for use in High and Low-temperature settings. Has a Set Screw Lock on its surface for securing the shaft. The PILLOW BLOCK can be mounted on levelled surfaces using the Two Bolt Holes. Grease Fitting Offset on top to Relubricate the bearing. - Specification: Item UCP207-20R3, Series UCP200, Bearing Number UC207-20R3, Housing Number P207, Bearing Bore Diameter Metric 31.75 mm, Bearing Bore Diameter Inch 1-1/4 in, Bearing Width Inner Ring Matric 42.90 mm, Bearing Width Inner Ring Inch 1.689 in, Bolt Size 1/2 in Number of Bolts 2, Bolt Hole Center to Center (e) Matric 127 mm, Bolt Hole Center to Center (e) Inch 5.00 in, Overall Length (a) Matric 167 mm, Overall Length (a) Inch 6.575 in, Overall Height (w) Matric 93 mm, Overall Height (w) Inch 3.661 in, Overall Width (b) Matric 48 mm, Overall Width (b) Inch 1.89 in, Mounting Surface to Shaft Center (h) Matric 47.60 mm, Mounting Surface to Shaft Center (h) Inch 1.874 in, Dynamic Load Rating Cr 25500 N, Static Load Rating Cor 15300 N, Limiting Speed 5300 r/min, Bearing Clearance Normal, Bearing Sealing type R3 Triple-Lip Seal, Lubrication Type Grease Shell RL2, Lubrication Temperature -20°C to +160°C, Rolling Element Indicator Ball, Bearing Material Gcr15, Housing Material H200 Cast Iron, Locking Type Set Screws, Weight 1.330 KG.