VEVOR Water Recirculation Pump, 120W 110V Water Movement Pump, Auto-Start Pump NPT 3/4" with Brass Attachments, Stainless Steel Top, Dual Speed Adjustment

Hero image 0 of VEVOR Water Recirculation Pump, 120W 110V Water Movement Pump, Auto-Start Pump NPT 3/4" with Brass Attachments, Stainless Steel Top, Dual Speed Adjustment, 0 of 9

Visit the VEVOR Store

VEVOR Water Recirculation Pump, 120W 110V Water Movement Pump, Auto-Start Pump NPT 3/4" with Brass Attachments, Stainless Steel Top, Dual Speed Adjustment

(No ratings yet)

Key item features

Constructed with a durable stainless steel pump head, aluminum pump housing, and PP impeller for rust-proof and waterproof performance
Powerful circulator pump with a large flow rate of up to 30 L/min, 10 bar pressure, and 36 ft head lift
Features a manual/auto switch for convenient control and energy-saving options
Easy installation with NPT 3/4" inlet/outlet hose and wrench, and the lubricating oil taste will disappear after a few uses
Suitable for various applications including city buildings, suburban villas, industrial equipment, and water heating systems

Specs

Brand
VEVOR
Gallons per minute
8 GPM
Plumbing pump type
Recirculating Pump
Model
VV-BXG-RS15 9SR
Volts
110 V
Watts
120 Watts

Current price is $53.99$53.99/ca

Price when purchased online

Out of stock

How do you want your item?

Out of stock

About this item

Product details

Product Description

120W Recirculating Pump

This water circulator pump is made of a premium stainless steel pump head and aluminum pump housing, features high power efficiency, low energy consumption, ample water flow, low noise running, and easy installation. Convenient for daily use, perfect for family water heating systems, such as remote villas, cabins, etc.

Heavy-duty Material

Our recirculating pump is made of stainless steel head, aluminum housing, and PP impeller and is also equipped with brass fittings and a water stop. As a result, rust-proof, waterproof, corrosion-proof, and leakages-proof can last for years.

Boost Water Flow

Powerful flow with 8 GPM and the highest head lift can reach 36 ft. The maximum pressure of this water circulator pump is 10 Bar(145Psi). High efficient and large flow but low energy consumption.

Dual Control Mode

The pump features a built-in high-sensitive electronic sensor, two control methods-manual start or automatic start. The pump will run continuously for manual mode, and the pump will run when the water flows when turned on automatic mode.

Quiet Operation

This circulating pump for hot water boasts a powerful motor for stable performance and low noise. The average noise level is only 25dB, enabling you to enjoy the pump without disturbing your life.

Effortless to Install

The recirculating hot water pump is easy to install on appliances and industrial electric or gas water equipment. However, you need to keep the pump shaft horizontally after installation.

Various Application

The recirculating pump for a water heater is a convenient water pressure boosting pump used in the water heating system, such as solar water heater, electric water heater, domestic water pipelines, etc.

Specifications

Model: VV-BXG-RS15 9SR

Power: 120W

Voltage: 110V/60HZ

Body Color: Red/Silver

Pump Head: Stainless Steel

Pump Housing: Aluminum

Impeller Material: PP

Shaft Material: Ceramic

Bearing Material: Carbon

Noise Level: 25dB

Inlet/Outlet Dia.: NPT 3/4" /1.9 cm

Max. Flow Rate: 8 Gpm / 30 L/min

Max. Head Lift: 36 ft / 11 m

Rated Pressure: 1 Bar / 14.5 Psi

Max. Pressure: 10 Bar/ 145 Psi

Cable Length: 4 ft / 1.25 m

Liquid temperature:32~212℉/0~100℃

Ambient temperature: 32~104℉/0~40℃

Mounting Position: Shaft Horizontal

Protection Level: IP44

Insulation Class: F

Product Size: 6.3x4.0x4.7 in / 16x10x12 cm

Package Content

1 x Recirculating Pump

2 x Brass Fittings

2 x Rubber Gaskets

1 x Water-stop(3.28ft)

1 x Instruction Manual

Constructed with a durable stainless steel pump head, aluminum pump housing, and PP impeller for rust-proof and waterproof performance
Powerful circulator pump with a large flow rate of up to 30 L/min, 10 bar pressure, and 36 ft head lift
Features a manual/auto switch for convenient control and energy-saving options
Easy installation with NPT 3/4" inlet/outlet hose and wrench, and the lubricating oil taste will disappear after a few uses
Suitable for various applications including city buildings, suburban villas, industrial equipment, and water heating systems

info:

We aim to show you accurate product information. Manufacturers, suppliers and others provide what you see here, and we have not verified it.