output support: 3.3V-21V/3A.
PD3.0/PD2.0 output support: 5V3A/9V3A/12V3A/15V3A/20V5A.(Type-C2 only supports 60W)
QC2.0 output support: 5V3A/9V3A/12V3A.
QC3.0 support: 5V-12V output voltage, 200mV/Step.
AFC output support: 5V3A/9V2A/12V2A.
Input support: 5V/9V/12V voltage.
FCP output support: 5V3A/9V2A/12V1.5A.
VOOC output support: 5V 4A.
Support Type-A1/Type-A2/Type-C port for external discharge at the same time.
Maximum 5V 3A, to fast charge please use single port.
Caution.
1: of the external battery of the motherboard must be to pass 10A current, at least 1 square copper wire, line to use 1.5 square. (Because the battery side of the current is very large)
Recommended to use 16AWG specifications of .
2: The motherboard comes with a protection chip, only supports 2-5 strings of batteries, 6 lithium iron phosphate batteries need to come with their own protection board,
3: Due to the battery side of the current is too large, you must use a thick wire welded on the battery to test, you can not use alligator clips to test the pad to charge and discharge.
There are some differences between the actual product and the picture due to different batches, which not affect normal use
Specification:4S 100W
Colour:Photo Color
Material:PCB
Package Contents:
1 Module
Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
