2 of CV Covers with 4 Stainless Steel Clips and 6 Zip Ties - CV Shaft Cover Kit for Shaft, Universal CV Joint

2 of CV Covers with 4 Stainless Steel Clips and 6 Zip Ties and CV Shaft Cover Kit Used To The Shaft Universal CV Joint Features: Specification: The shaft sleeve length is 4.72 inches, the inner diameter of the small hole is 0.78 inches, and it includes three different diameters: 2.55 inches/65 millimeters, 3.14 inches/80 millimeters, and 3.54 inches/90 millimeters. Please confirm the size data you need before purchasing. You will receive: 2 CV joint covers, 4 stainless steel clamps, and 6 zip ties. Suitable for most vehicles. Easy to install, simply the old or worn CV cover, and then use an installation to install the new CV shaft cover onto the shaft. Excellent : The CV axis protective cover is like a sturdy shield, providing all-round . It can effectively the of , sand, water, and other impurities, while also grease from overflowing from the bearing cage. : Made of high-quality silicone material, it has excellent wear resistance and high temperature resistance. The softness and elasticity of silicone enable the CV cover to fit tightly and not loosen or fall off due to vehicle vibration : in the daily of vehicles, the CV bridge cover should be regularly inspected for damage, cracks, aging, deformation, and loose fixing devices at both ends. If damage is found, it should be replaced in a manner. Product Description: 2 of CV covers with 4 stainless steel clips and 6 zip ties, and CV shaft cover kit, used to the shaft, universal CV joint Material: silicone Color: as the picture shows, (Due to the difference between different monitors, the picture may have slight color difference. please make sure you do not mind before ordering, Thank you!) Package weight: 280g Package size: 12x9x9cm,(Please allow 1-3mm error due to manual measurement. please make sure you do not mind before ordering.)