ToppiJoy 4-Stroke 9HP 3800r/min Outboard Motor Gas powered Boat Engine with Air Cooling Heavy Duty(Black)

Description:

This outboard motor is made of high-quality aluminum alloy material, which is a good choice for you to enjoy your cruise. The excellent engine performance can bring you a comfortable sailing experience, as well as convenient ignition and flame failure devices to protect your safety. All you need to do is install it in the stern of your boat, and you can enjoy a fast and easy-to-operate water journey!

Details:

Engine Oil Filling Pipe: The smooth engine oil filling pipe (5.51inch) makes it easier for you to fill the oil without easily spilling.

Stern Plate Clamping Bolt: It can firmly fix the outboard motor on your ship and is not easy to slide.

Ergonomic Handle: The rubberized throttle control handle increases friction and has a comfortable grip, making it easier to use.

Quality Silencer: It can effectively alleviate the noise generated during the operation process, control the noise within an acceptable range, and provide a comfortable working environment.

Application:

This outboard engine is suitable for inflatable boats, iron boats, plastic boats, fiberglass boats, wooden boats, etc. with a stern plate height of 11.81-19.69 inches. It is widely used in fields such as fisheries, aquaculture, and outdoor exploration.

Specification:

Color: Black
Material: Aluminum Alloy, Nylon, Rubber
Process: Spray Molding
Engine Type: 4-stroke, OHV
Displacement: 225CC
Compression Ratio: 8.4:1
Cylinder: 1
Max.Output: 4.3kw
Rotation: 3800r/min
Max. Speed: 15km/h/9.32miles/h
Idle Speed: 1800+150rpm
Net Torque: 12.5n.m / 7.7 Lbf.ft, 2500rpm
Gear: Clutch (No Shift Required)
Ignition System: TCI
Cooling System: Forced Air-cooling
Starting System: Manual Recoil
Power Transmission Mode: Gear Transmission Mode
Recommended Fuel: Above 92# Unleaded Gasoline
Engine Oil: SAE10W-30 Four-stroke Oil (Approximately 0.6L Added to the Ccrankcase, Between the Upper and Lower Lines of the Dipstick)
Trim and Tilt System: Manual Tilt
Fuel Consumption: 1.5L/0.4Gal/H
Fuel Tank Capacity: 1-1.5L/0.26-0.4Gal
Gear Oil Capacity: 0.1L/0.03Gal
Bore Stroke: 7*5.8cm/2.76*2.28inch
Standard Shaft Length: 70cm/27.56inch
Adaptive Transom Plate Height: 30-50cm/11.81-19.69inch
Propeller Diameter: 19cm/7.48inch
Joystick Length: 59cm/23.22inch
Oil Filling Pipe Length: 14cm/5.51inch
Product Lower Part Length: 76cm/30inch
Product Total Length: 110cm/43.31inch
Gross Weight: 32.3kg/71.21lbs
Net Weight: 25.6kg/56.44lbs
Engine Size: 46*37*30cm/18.11*14.57*11.81inch
Package Size: 120.5*52.5*40.5cm/47.44*20.67*15.94inch

Package Included:

1* Outboard Engine
2* English Manuals
All Accessories for Installation

Notes:

1.Please carefully read the manual and strictly follow the precautions to have a better experience.
2.Please measure the height of your boat before purchasing to ensure suitability for this product.
3.Please ask a professional master to fix it on the boat, then firstly add 4-stroke oil according to the scale between the upper and lower lines of the scale (please do not start the motor without engine oil). The fuel tank should be filled with pure gasoline of above No.92, and then start the motor.
4.Please do not drive too fast during the running-in period. After the running-in period, the oil in the crankcase needs to be replaced, and the second replacement time is about 30 hours. Replace it every 50 hours thereafter.
5.Please note that the propeller gearbox requires a gear oil change every 50 hours.