LCF013 Wind Sensor Air Volume Sensor AirVolume Test Signal Airflow Monitor 50M/s

Features:
Dual Switch Options (N C/NO) – The LCF013 features both Normally Closed (N C) and Normally Open (NO) mechanical switch types. N C models open contacts upon airflow detection (triggering alarms/indicators), while NO models close contacts when airflow is present.
Reliable Airflow Monitoring – Designed to detect fan failure or filter blockage, this airflow monitor signals air loss in ventilation ducts, fan systems, or filter units, regardless of airflow direction.
Simple Mechanical Operation – A lasting, non-electronic solution for airflow monitoring, guarantee reliability without complex wiring or power requirements.
Compact & Easy Installation – Its small size allows flexible mounting in ducts or near fans/filters, with straightforward connection to alarms or indicator lights.
Safety Note – for Max. rating: 10W (do not exceed). Requires contact protection circuits for inductive/capacitive loads to prevent voltage/current spikes.

Specification:
Part Name: Airflow monitor
Model: LCF013
Color: Black
Contact type: Magnetic contact
Normally closed (N C): The switch contact is closed when air flows
Normally open (NO): The switch contact is open when air flows
Maximum switching voltage: N C: 240VDC (UL), 240V AC/DC (VDE)/NO: 60VDC
Maximum switching current: N C: DC 500mA/NO: DC 170mA
Maximum switching capacity: 10W (resistive load)
Wind speed switch switching value: >2.5m/s (hysteresis: >1m/s)
Maximum wind speed: 50m/s
Contact resistance: <370mΩ (with wire)
Maximum air humidity: 70%RH (not precipitating)
Wiring way: 2 AWG26 wires, 500mm long, N C is black wire, NO is blue wire
Installation way: snap-in
Casing material: plastic UL94-HB
Installation way: snap into the fan mesh cover
Operation/storage temperature: -20 to +50℃ (-4 to +122℉)/-20 to +80℃ (-4 to +176℉)
Protection level: IP20
Product function: air volume sensor
Size: 120 x 120 x 10mm

Package Contents:
1*Airflow monitor


Notes:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.