Product Overview:
It is suitable for drying, baking, wax melting and heat treatment in laboratories of industrial and mining enterprises and scientific research institutes.
Technical parameters
Models: 420BS
Voltage: 110V
Power: 300W
Working environment temperature: 41°F-104°F（5-40℃）
Temperature fluctuation: +/-32.9°F(+/-0.5℃）
Temperature Control Range: RT+41°F--149°F（RT+5℃--65℃）
Capacity: 70L
Operation and usage
Turn on the power and turn on the power switch and the heating switch.
Press the setting key to enter the temperature set state. The lower row shows the temperature setting value, which can be changed to the desired setting value by shifting, increasing or decreasing the key; then click the“Set” key.
If the alarm is over-temperature due to the change of the temperature setting value, it can be silenced by pressing any key.
“◀”Click on this key in the set state to make the set value shift flicker changes.
“▼”Click this key in the set state, the set value can be decremented, long press this key can make the set value successive decrements. In a timed state, pressing the key for 3 seconds can stop the program.
“▲”Click this key in the set state, the set value can be incremented, long-press this key to set the value of successive increments.
If no key is pressed within 1 minute, the controller will return to the normal display state automatically.
If the upper row of the display window of the controller shows”--”, which means that the temperature sensor or the controller itself is out of order, please carefully check the temperature sensor and its wiring.
Item Number: 239960
Electrothermal incubator
