Miumaeov Hardware 1 Pair of 28 Inch Heavy Duty Drawer Slides, 500LB Full Extension Side Mount Ball Bearing Drawer Rails, Galvanized Anti-rust Drawer Slides with Lock & Buffer Cushion

Description

This heavy-duty drawer slide is made of cold-rolled steel Q235 which is durable and has a long service life. Cold-rolled steel has good corrosion resistance and heat resistance, so it won't rust or jam under proper use. This heavy-duty drawer slide has double rows of solid steel balls to ensure a smooth and silent push and pull.

Details
【Galvanized Finish】 The surface of this heavy-duty drawer slide is galvanized, which is anti-oxidation and anti-rust.
【Buffer Cushion】 This heavy-duty drawer slide has a buffer cushion, which can prevent the collision between the three slides and play a buffer and silent effect.

Application

This heavy-duty drawer slide is suitable for modifying RV equipment, heavy-duty tool cabinets, shelves, cabinets, industrial drawers, trucks, vending machines, etc.

Installation Steps.

1. Find two horizontal lines in the installation position on both sides of the cabinet, and fix the outer fixed slides to the horizontal lines on both sides with screws; (Note: the positioning of both sides must be parallel).

2. Completely pull the slide rail, and fix the drawer to the inner fixed rail with screws according to the horizontal line.

3. The installation is finished.

Specification

Style: Simple, Modern

Material: Cold Rolled Steel Q235

Color: Silver

Quantity: 2

Process: Galvanized Finish

Load-Bearing Capacity: 226.8kg/500lbs

Slide Length: 71.12cm/28in

Slide Width: 7.6cm/3in

Package Size: 80*18*6cm/31.49*7.08*2.36in

Gross Weight: 7.2kg/16lbs

Package Included

1 Pair of Heavy-Duty Drawer Slides

Notes

1. Please note that the locking mechanism only works when the drawer is fully closed or fully open.  

2. Please note that in order to ensure the safety of users, the heavy-duty slide rails cannot be disassembled.

3. Please note that screws are not included in the package, you need to purchase your own M4 and M6 half-round head screws.

4. Please note that the installation gap on both sides should be more than 20mm/0.79in.

5. Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before ordering.