2 PCS Grinding Machine Plates, Cast Steel, Dry Grain Grinding Discs for Farms
Key item features
- Sturdy & Robust: This product is made of premium fine cast steel, which has undergone a series of treatments to resist corrosion and wear, is not easy to deform, or age, and has a long service life.
- Stable Fixation: The design of the three-hole installation hole can firmly fix this product inside the machine, improving the safety of use.
- Strong Load Capacity: With a thickness of 8mm, it can withstand the high-speed operation of the grinding machine and the impact of harder particles, resulting in less wear.
- 2PCS A Set: This set includes two grinding discs, which you can purchase at once without the need for repeat orders.
- Wide Adaptability: The precise size of this product is suitable for the 150-model grinding machine, and you can easily replace your grinding discs.
- Easy to Replace: This product has a simple structure, and you can quickly complete the replacement and start using it.
Specs
BrandCNCEST
MaterialCast Steel
- Free shipping
Free 30-day returns
How do you want your item?
About this item
Product details
Details
Fine Tooth Patterns: They can increase friction and help grind grains into finer particles.
Round Design: The round design enhances the beauty of the product and better protects your skin when installing and cleaning it
How to Install
1. Open the front cover of the machine, remove the grinding discs, and then loosen the screws that fix the grinding discs and take them out.
2. Reinstall the new grinding discs back to the original grinding discs position and lock the screws, but do not lock them first. First, observe the gap between the inner circle of the grinding discs and the mounting step, and adjust the gap to ensure uniformity. Concentric with the motor shaft. Then tighten the screws.
How to Adjust
1. Put the product back into the grinding chamber, adjust the screw, turn it counterclockwise, then cover the front cover and lock it.
2. Start the motor and tighten the adjusting screw clockwise until the product rubs a sharp sound. Turn off the switch after the motor idles for two minutes.
3. Open the front cover, take out the product, observe the friction marks of the moving of the product and the static grinding piece tooth groove, and touch the product around the hand. If the friction marks on it are evenly distributed, and the heat difference is not obvious, it means that the product is installed in balance and can be used directly without adjustment.
Application
It can be used for grinding relatively dry grains such as rice, soybeans, wheat, and soybeans, and can be widely used in households, farms, dry goods stores, food processing, and other places.
Specification
Material: Fine Cast Steel
Color: Grey
Number of Items: 2
Applicable Grinding Machine Model: 150 Model
Purpose: Dry Grinding
Each Inner Diameter: 77mm/3.03in
Center Distance: 98mm/3.86in
Each Product Diameter: 147mm/ 5.79 in
Edge Thickness: 8mm/ 0.32 in
Package Size: 26*17*4cm/10.24*6.69*1.57in
Gross Weight: 0.93kg/2.05lbs
Net Weight: 0.6kg/1.32lbs
Package Included
2 * Grinding Discs
Notes
1. Please note that it excludes machines.
2. Please do not apply too much force, the three screws should be evenly and gradually tightened.
3. Model 150 grinder discs also can be used for other commercial electric feed mill dry grinders, please measure the dimensions before ordering.
4. This product cannot be used for water grinding or grinding materials with high moisture, oil, or viscosity, as well as herbs.
Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before ordering.
- Sturdy & Robust: This product is made of premium fine cast steel, which has undergone a series of treatments to resist corrosion and wear, is not easy to deform, or age, and has a long service life.
- Stable Fixation: The design of the three-hole installation hole can firmly fix this product inside the machine, improving the safety of use.
- Strong Load Capacity: With a thickness of 8mm, it can withstand the high-speed operation of the grinding machine and the impact of harder particles, resulting in less wear.
- 2PCS A Set: This set includes two grinding discs, which you can purchase at once without the need for repeat orders.
- Wide Adaptability: The precise size of this product is suitable for the 150-model grinding machine, and you can easily replace your grinding discs.
- Easy to Replace: This product has a simple structure, and you can quickly complete the replacement and start using it.
