Brake Bleeder Hose - One Way Check Valve Tube Bleeding Tool Kit for Hydraulic System Bleeding, 2025 New Motorcycle Hydraulic Brake System Bleeding Tools, for Repair and Maintenance (2pcs)

Step1: 【Open】
1. Open the brake bleeder nipple of the caliper

Step2: 【Connect the Hose】
1. Place one end of the hose onto the bleed nipple and secure with hose clip(only recommend)

2.remark: Please refer to the picture, and pay attention to the one way valve direction, as there is a mark on the aluminum body which is showing the brake fluid flowing dirction, the direction of arrow on the valve should be away from the caliper

Step 3. 【Release and start press the brake Lever】
3.1 Loose the brake bleeder Screw a little

3.2 Start pressing the brake Lever SLOWLY

3.3 Check until all air bubble has been flushed out

3.4 Make sure the fluid level in the mastercylinder reservoir is not too Low ,and fill

Material:
Aluminum(brake bleeder check valve)
Rubber(brake bleeder hose)

Size:
Total length: 19.7in / 500mm
Oil outlet tube length: 13.8in / 350mm
Oil outlet tube OD: 0.31in / 8mm
Oil outlet tube ID: 0.2in / 5mm
Oil inlet tube length: 5.9in / 150mm
Oil inlet tube OD: 0.2in / 5mm
Oil inlet tube ID: 0.14in / 3.5mm
Check valve length: 2.2in / 55mm

Package includes:
1/2 x Oil outlet tube
1/2 x Oil inlet tube
1/2 x Check valve
2/4 x Clamp

Notes:
1. Manual measurement, please allow slight errors on size.
2. The color may exist a slight difference due to different screen displays.
3. Small parts included, please keep them away from little kids to avoid swallowing risk.