35mm Concealed Hinge Jig, Accurate Locking Hinge Drilling Jig, Hole Guide Hole Puncher Locator Tools For Door Cabinets Hinges ,Easy to Use

1, install the 35mm hole opener, adjust the hole depth, the normal 12-13mm, and then lock the limit ring.

2. Adjust the fixed size of the quick clip black block (Note: the tool can adjust the fixed size of the board to 15-25mm)

3. Move the hole punch to the position where the board is marked and punched, and lock the quick clip.

4, the electric drill tights the handle of the hole opener, presses the hole at a constant speed to a depth of 12-13mm, and then makes 2mm screw holes on both sides. 5.35mm hole to edge distance of 5mm, suitable for most commonly used hinges

6. Install 35mm hinges