Feature:
*DC sensing switch: Range 1-200A, contact capacity 0.5A@240V AC/DC, 10-30VDC SIGNAL TO PCL, give PLC signal NO POWER SUPPLY REQUIRED
*Thick shell, fire-proof and flame-retardant: The current induction switch has excellent comprehensive performae, excellent strength, fire-proof and high-temperature resistae, and stable working performae
*Perforated isolation induction type: When the perforated current reaches the set value, a switching signal is output (can drive a relay, a current contactor, or a switching signal to a PLC). When the current is lower than this value, it automatically resets, and so on.
*Adjustable threshold, high conductivity terminal block: large switch contact capacity, fast response, no mechanical noise, no opening and closing sparks, no limit on the number of repetitions
*Use scenarios: mechanical equipment supporting, automatic smart home, equipment linkage, assembly line control linkage, conveying and feeding control, PLC switch signal, etc.
Specification:
Part Name: DC sensor switch
Material: plastic shell
Color: blue
Size: 70*50*80mm
Contact form: NO,
Contact capacity: 0.5A@240Vac/dc
Maximum overload: +100%@200A
Sensing range: 1~200A (DC)
Startup time: within 0.1S
Shell material: ABS fireproof type
IP rating: IP30
Working temperature: -10℃~+50℃
Frequey range: 40-400Hz
Contact form: normally open/normally closed
Power supply: 10-30VDC/no power supply required
Current threshold: adjustable by potentiometer
Package Contents:
1*DC sensor switch
Note:
1. The perforated line can only be single-phase line
2. Select the corresponding range according to the current of the perforated wire.
3. This product is an electronic switch. Contacts for K1 and K2 cannot be directly measured with a multimeter. They can only be observed by connecting a load.
4. The for K1 and K2 contacts output switching signals, do not output voltage or current, and a power supply needs to be connected to the load.
