220V Farm Household Straw and Feed Crusher 6-Blade Pulverizer Crop Straw Breaker

Introduction:
Dual use, dry and wet, not jammed, not tangled with grass.
This machine adopts chain automatic feeding and is suitable for cutting and kneading crops such as grass, corn stalks,sorghum stalks, wheat straw, rice straw, straw, etc. The cutting and kneading process can be adjusted in length. The hard stem nodes on the surface of the straw are destroyed through the cutting and kneading process, and the processed feed becomes soft and filamentous without hard nodes. This improves the taste of livestock and poultry ingredients such as cows,sheep, chickens, pigs, geese, rabbits, and improves the feed utilization efficiency of livestock and poultry, It is a necessary straw kneading mechanical equipment for farmers and small and medium-sized feed processing factories.

Parameter:
Voltage: 220V
Power: 3KW
Capacity: Crush: 500kg/h
Cutting Grass: 2-3.8T/h
The Knife: 6-Blade+Serrated Knife
Applicable: Farms Home

Precautions:
1.Before using this machine, it is necessary to conduct a comprehensive inspection and adjustment to ensure that all connections are secure and reliable, and all rotating parts must be filled with lubricating oil.
2.Before starting the motor, jog it first to check for any abnormal collision sounds. At the same time, observe whether the rotor direction is consistent with the arrow direction marked on the body.Then, start the machine and idle for 5-10 minutes, and wait until everything is normal before feeding and working normally.
3.Apply lubricating grease evenly to the rotating gears and transmission chain wheels every 12 hours of operation, and apply grease to each operating part of the machine every 24 hours of operation.
4.When the work is about to stop, the machine should idle for 3-5 minutes to remove any remaining materials from the body.
After cleaning the machine, lubricate and maintain all rotating parts.

Item Number:
Farm Home Straw And Fodder Crusher 145037