Features:
*8mm stepper motor for precision peristaltic pump, for precision all-metal Small peristaltic pump, all-metal gear reduction pump head set, peristaltic pump supports two-way change of water flow direction, copper roller peristaltic pump head, high workmanship requirements.
*The pump tube uses 2.5mm silicone tube, the motor is 8mm two-phase four-wire stepper motor, the phase stability is 22 ohms, the peristaltic pump weighs 5.2 grams, the motor rated voltage is DC5V, the rated current is 150mA, and the maximum flow rate tested using our stepper motor driver board is 0.5ml/minute.
*Stepper motors can achieve high- for precision quantitative output, but specific research is required.
*The maximum supported voltage of the simple driver is DC 3V-5V, and it can be powered by a single DC 3.7V lithium battery. Too low voltage will affect the maximum speed of the motor, and the output will be smaller when using a low-voltage power supply. The stepper motor driver needs to be purchased separately.
Specifications:
*Product Name:8mm stepper for precision peristaltic self-priming pump
*Material:ABS+Metal
*Size:As shown
*Color:As shown
Package Content:
1 x Peristaltic Pumps
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.
