Globe 286-1 Genuine OEM Sharpener Hinge Bolt Washer

A hinge is a mechanical bearing that connects two solid objects, typically allowing only a limited angle of rotation between them. Two objects connected by an ideal hinge rotate relative to each other about a fixed axis of rotation: all other translations or rotations being prevented and thus a hinge has one degree of freedom. Hinges may be made of flexible material or of moving components. In biology, many joints function as hinges like the elbow joint.

Knife and blade sharpening is the process of making a knife or similar tool sharp by grinding against a hard, rough surface, typically a stone or a flexible surface with hard particles, such as sandpaper. Grinding is generally done with some type of sharpening stone. Sharpening stones come in coarse and fine grits and can be described as hard or soft based on whether the grit comes free of the stone with use.

A washer is a thin plate (typically disk-shaped, but sometimes square) with a hole (typically in the middle) that is normally used to distribute the load of a threaded fastener, such as a bolt or nut. Other uses are as a spacer, spring (Belleville washer, wave washer), wear pad, preload indicating device, locking device and to reduce vibration (rubber washer). Spring washers, which have axial flexibility are used to prevent fastening or loosening due to vibrations. Locking (lock) washers prevent fastening or loosening by preventing unscrewing rotation of the fastening device.

• Genuine OEM Sharpener Hinge Bolt Washer
• Made with high quality material

• Height: 0.01 in.
• Width: 0.65 in.
• Length: 0.65 in.