Uxcell 110Pack Foam Lid Liner, 35mm/1.38" PS Foam Resistant Tamper Pressure Sensitive Seal for Bottle Cap Liners Seals

Advantage:

Keep Fresh: The pressure-sensitive seal which is made of polystyrene foam material effectively avoids dust, moisture and dirt into the jar and prevents leaks and odors in the bottle so that it can keep the dry or powder products fresh at all times. In addition, it can protect your products from tampering securely.

EASY to USE: No induction sealers or heat shrink bands needed with these liner seals. No tools or heat gun required. This foam seal peels easily from the container When you need to open.

Instruction:

1. Keep the cap where the seal needs to be attached clean, make sure there are no water spots and oily residues.;

2. Put the lettering side of the seal into the cap and apply a little pressure to attach it tightly;

3. Finally, Screw the lid on as tightly as you possibly can, the seal is activated by the pressure of applying the lid and will adhere within 12-24 hours (No Strong Stickiness).

NOTE:

1. Please make sure the right size you need before ordering.

2. Once the seal is removed, the tightness will be affected when reused.

3. These pressure-sensitive liners are best used with powder or dry products, not suitable for applications containing oil; Avoid overfilling the container.

4. It is recommended to wait enough time before removing the cover after installation.

5. These PS foams are not suitable for use at high temperatures.