Green RJ11 RJ45 cable Tester Computer Connectors network ethernet Cables for PC laptop instrument a f usb cat5

Green RJ11/RJ45 cable Tester Computer network cable Tester for measuring instrument network telephone cables 10.5*10.5*2.6 mm

Technical indicators:

Test cables: RJ11, RJ45

Power source: DC 9V laminated battery

Power consumption: 25MA

Volume: 10.5 * 10.5 * 2.6 mm

Weight: 200G

A function:

1 twisted pair 1,2,3,4,5,6,7,8, G line right by the root (right) test, and determine which one to distinguish between (right) the wrong line, short circuit and open circuit.

2 switch ON for normal test speed, "S" for slow test speed, M is manual.

Two, twisted pair test:

Turn on the power, the network cable plugs were inserted into the main tester and remote tester, the host from 1-8 lights flashing sequentially one by one, under the legend:

Main tester: 1-2-3-4-5-6-7-8

Remote tester: 1-2-3-4-5-6-7-8 (RJ45)

1-2-3-4-5-6 ------ (RJ11)

1-2-3-4 ---------- (RJ11)

If the wiring is not properly displayed in the following circumstances:

1 When there is a network cable, such as the 3rd line circuit, the main tester and remote tester on the 3rd lights are not bright.

2 When there is nowhere a few lines, then a few lines are lit, when the network cable is less than two lines connected, the lights are not bright.

3 When the two cable disorder, for example, 2,4 line out of order, the display is as follows:

Main tester unchanged: 1-2-3-4-5-6-7-8

Remote Test side is: 1-4-3-2-5-6-7-8

4 When the network cable has two short-circuit, the main tester display is not bright, and remote tester displays two lines shorted micro-lights are lit, if three or more (including 3), when all shorted shorted several lights are not bright line numbers.

Third, if the measured patch panels and wall seat module, you need to match two root jumper (eg 110P4-RJ45) lead to the tester.

The new multi-use expert network cable tester, RJ45 connector for network or telephone lines to be tested. Will be tested separately access the network cable tester host when using the tester extension, turn on the switch, ON stall is a quick test, S file for slow tests. Normal cable line sequence when the test ends two numbers lamp 1 --- 8 respects synchronous flashing one by one. In case number order disorder flashing, wiring error or cross-line order line connection. In case of a certain number does not light, then the cord is not turned on behalf of the relevant, if there are not any lights flashing, it means that more than half of the root of the cable line is busy or there are other problems.

Fashionable, stable performance, small size, light weight, very easy to carry.