JVCC TR-5A Adhesive Transfer Tape: 1-1/2 in x 60 yds. (Clear Adhesive on Brown Liner)

JVCC TR-5A Adhesive Transfer Tape is an unsupported (it does not have a backing and is only adhesive) acrylic adhesive transfer film tape on a siliconized paper liner. Please note the tape is not reverse wound or on a 1" core like an ATG tape so does not require an ATG dispenser to apply it (please note that it will not fit or work in an ATG dispenser for these reasons). JVCC TR-5A's glass stabilization allows for lathe slitting and cleaner unwinding. Its thick adhesive coating coupled with high quick tack and good shear strength makes this the best choice for more demanding bonding/joining applications, especially for textured, rough surfaces. If the application involves laser cutting a transfer tape such as JVCC TR-5A is preferred since unlike a PVC film tape it won't give off chlorine gas when burned. Used for core starting, splicing of papers, films, metals, and other webs. The tape is also suitable as a laminating adhesive for foams or fabrics. The manufacturer states this transfer tape is acid-neutral based on lab tests; however, there is no standardized test for pH for materials not soluble in water and this transfer tape is not soluble in water.

NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i.e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 36mm x 55m. This tape is typically cut to width from log rolls so most sizes ship on non-branded plain white cores. As with any adhesive tape product it is always the user's responsibility to determine that the product is suitable for their intended use; e.g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first. Warning: This product can expose you to chemicals including Toluene, which is [are] known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/.

Technical Information
- Core: 3 inch diameter
- Backing/Carrier: N/A (Unsupported)
- Adhesive: glass stabilized solvent based acrylic
- Release Liner: brown siliconized paper
- Thickness: 8.45 mils (carrier, adhesive, liner) 4.7 mils (carrier, adhesive) 4.7 mils (adhesive)
- Adhesion: 105 ounces per inch (to stainless steel test panel)
- Service/Operating Temperature: -22F to 230F