Patco 5068 Greenhouse Repair Tape: 1 in x 36 yds. (Clear)

Patco 5068 Greenhouse Repair Tape is a short-term economy-grade greenhouse patch, seal & repair tape. Used for general purpose sealing, splicing and seaming as well as surface protection and temporary hold-down applications. Patco 5068 Greenhouse Tape is conformable to irregular surfaces, performs well over a wide temperature range, is optically clear & hand-tearable; will not crack or crease at low temperatures, has an easy unwind and provides an excellent moisture barrier. This tape is not UV stabilized. Made in the U.S.

NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i.e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 24mm x 33m. This tape is typically cut to width from log rolls so most sizes ship on non-branded plain white cores. As with any adhesive tape product it is always the user's responsibility to determine that the product is suitable for their intended use; e.g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first.

Technical Information
- Core: 3 inch diameter
- Backing/Carrier: low density polyethylene (LDPE) film
- Adhesive: acrylic
- Thickness: 5.5 mils (carrier, adhesive) 4.5 mils (carrier)
- Adhesion: 50 ounces per inch (to stainless steel test panel)
- Tensile Strength: 11 pounds per inch (longitudinal)
- Application Temperature: 50F to 120F
- Service/Operating Temperature: -40F to 190F
- Elongation: 400 %