Spill Proof Coolant Filling Funnel Kit, Plastic, Metal Black/Yellow/Transparent, 15 Count

Instructions:
1. Install the correct size adapter and Tight to make sure it doesn't leak. Place the gasket in a downward position.
2. YOUR CAR SHOULD BE OFF, DO NOT THE CAR YET!
Fill the coolant funnel about 1/3 up while COLD, so when system burps fluid falls into the system rather than more air.
3. Go to your car and set the climate controll settings (or heat setting) to the hot, but make sure that the fan/heater is "OFF".
4. Now you car, let the car idle for a while until it's hot enough to open the thermostat and turn on the fans.
After waiting, and once the thermostat opens up to cool your engine
you'll see the coolant level drop, and a few to a large amount of air comming up, this is the air escaping your cooling system.
5. After standard hour of running, if you still see air bubble comming out, check your overflow tank and make sure it has coolant in it.
6. When run the engine, fluid level should be at low position. Keep RPM on idle position.
(Shut down the engine if notice the fluid level rise excessively. Wait for fluid level go lower before restarting the engine.)
7. Once the bubbling stopped, Use Fluid Stopper for remaining fluid inside the funnel
8. Finish
Colour:black+yellow+transparent
Material:Plastic + Metal

Package Contents:
1 set x Spill Proof Coolant Filling Kit

Only the above package content, other products are not included.
Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.