Item Details:
* Brand new and high quality
*Material: Stainless Steel
*Size:
5.9 x 3 x 2cm( for 2.35 x 1. for 2 x 0.8 in) /105 Degree right angle head
1/2 "to 3/8" - (12.5mm square hole to 9.5mm square head) Length: 36mm
3/8 "to 1/4" - (9.5mm square hole to 6.3mm square head) Length: 26mm
3/8 "to 1/2" - (9.5mm square hole to 12.5mm square head) Length: 35mm
*Height: about 25mm, 26mm, 35mm, 36mm
*Torque capacity: 16N. Only 1/4 hex head is allowed
*Not applicable to drills
*105°Right Angle Drill Driver Can be connected to the drill, rechargeable drill or manual wrench, extending their reach to inaccessible stenosis , twisting screws, nut and more
*105° designs for tight spaces, extends the power of a cordless screwdriver - 100 in/lbs. torque, 400 RPM.These Tools are Work Great for Light Drilling,Slow Speed/Screw Driving,Like Cordless Drill,Ratchet Screwdriver,etc.
*105°Angle Extension of Chrome Vanadium steel, high hardness angle drill bit holder, anti rust, die cast body with 3 ball bearings for long life [Strong Magnet] Built in strong magnet for good holding power, this right angle drill attachment is easy to use and avoid falling off [Easy To Use] 105 degree angle extension, 360° parallel adjustment, perfect handy tool for hard-to-reach corners and tight spaces, max torque 15n/m
*3Pcs1/4 3/8 1/2"Square Nut Hex Shank Driver Drill Bit Used in the installation of pneumatic screwdriver, electric screwdriver, pneumatic drill, manual screwdriver and other installation for the hexagonal tool
*It is a good accessory for conversion. for Socket, Adapter and Reducer Set, Joint Set,Socket Adapter and Drive Reducer Set,Drive Socket Extension Bar Set,Drive Socket Set 1/4" Hex shaft screwdriver extension, convenient, , long lasting and easy to use
*It's good for wrench and power drill, rechargeable drill or manual wrench.Light weight, fast, connect to the standard hex screwdriver
*Functional head has locking & magnetic function, 105 Degree right angle head.
*Note:
Please adjust the torque to a minimum when using the electric screwdriver.
Do not rely on it to tighten the screws if the hand drill is used.
Finally, you must tighten the angle driver adapter manually, or the gear will be broken off.
All Sockets Standard 1/4" Hex Shank
Package Contents:
1*(1/4'' Hex Shank to 1/4''Socket) Socket Adapter
1* (1/4" hex shank to 3/8" socket)Socket Adapter
1* (1/4" hex shank to 1/2" socket)Socket Adapter
1*105° Angle Drill Adapter
Notes:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.
