The Sharkbite Push-Fit Connection System is the best option for connecting PEX tubing in water distribution systems when lower material cost is desired. Robustly constructed with lead. Free DZR brass, the SharkBite Barb fittings are corrosion resistant. Use for new installation and repair of potable water distribution systems. Fittings should be wrapped with an impervious material, chloride-free tape or tightly wrapped and sealed insulation works well to prevent direct contact with the backfill. Backfill should be free of rocks, debris or any sharp objects that may cause damage through impact or abrasion.
Features - Lever handle
- For use with Pex tubing
- ASTM F-876, ASTM F-877 to SDR-9 dimensional standards
- NFS 14 & 61 for use in potable water systems
- CSA B137.5 standards, NSF CL-R certified for use in hot water systems where chlorinated 140 degree fahrenheit hot water can be constantly re-circulated
- The wetted surface of this product contacted by consumable water contains less than .25 of 1 percent, 0.25%, of lead by weight
- Meets AB1953 California & VT S152 Vermont low lead restrictions
- Lead free
Specifications - Material: Brass
- Turn: 0.25
- Size: 1/2" x 1/2"
- SKU: JNSN94928
WARNING: 