Female MC4 Evo2 LR5 Solar Connector — 1500 V, IP67, High-Efficiency Photovoltaic Link Female MC4 Evo2 LR5 Connector from Conversions Tech—engineered to deliver rock-solid, loss-free power transfer in modern photovoltaic (PV) installations. Built on the trusted MC4 platform and rated for 1500 V DC / 30 A, this connector guarantees long-term reliability in rooftop, ground-mount, and off-grid solar systems. Why Install the MC4 Evo2 LR5? Maximum Output, Minimum Loss — ultra-low <0.5 mΩ contact resistance keeps energy flowing at peak efficiency. All-Weather Armor — IP67 sealing, -40 °C → +90 °C operating range, and UL94-V0 flame class protect against rain, dust, and UV. Snap-Fit Simplicity — intuitive locking mechanism clicks securely into place; no guessing, no slippage. Universal MC4 Compatibility — mates flawlessly with standard MC4 male plugs for painless retrofits and expansions. Solar-Grade Materials — PPO + PA housing and tin-plated copper contacts combat corrosion for 25-year system lifespans. Technical Specifications Rated Voltage 1500 V DC Rated Current 30 A Contact Resistance ≤ 0.5 mΩ Protection IP67 (dust-tight & water-proof) Operating Temp. -40 °C to +90 °C Insulation PPO + PA composite Flame Rating UL94-V0 (self-extinguishing) Cable Range 10 AWG – 12 AWG solar wire Contact Metal Tin-plated copper Locking System Snap-on, tool-free release Quick-Start Installation Guide Strip & Prep — remove insulation to manufacturer-specified length for a clean conductor cut. Insert — slide the exposed copper into the crimp sleeve until fully seated. Crimp — use an MC4-approved crimp tool to achieve a gas-tight bond. Assemble — push the crimped pin into the connector housing; listen for the audible “click.” Inspect & Seal — tug-test for firmness, verify O-ring alignment, and ensure the IP67 seal is intact. Couple — mate with the corresponding male MC4 plug until the locking tabs engage. Conversions Tech—Powering Tomorrow’s Solar, Today.
WARNING: 